Hangzhou Grow Technology Co., Ltd
Address: Room 310, Building B, Building 1, No. 279, Shiqiao Road, Xiacheng District, Hangzhou
Tel：86 571 86688123
Fax：86 571 89922886
Copyright © Hangzhou Grow Technology Co., Ltd
K216 Technical Parameters
·P1: Power supply：DC10V--30V
·P2: Output：Relay（Max. current: 10A）
·P3: MX 1.0-6P Fingerprint Module (can connect R502)
·P4: MX 1.25-6P Fingerprint Module (can connect R300,R301T,R302,R303,R303T,R305,R306,R307,R501)
·Fingerprint capacity：300 pieces
K216 Operation Instruction
1. SET Button:
1.1 Press SET button shortly,system in register state and indicator light flash fast, press two times for each fingerprint, fingerprint register successful when hearing music.Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting 8 seconds.(Fingerprint capacity is 100 pieces when press SET button，the registered fingerprints are stored in database 01)
1.2 When back to factory default, press SET button until hear “Di” long beep and music,means initialization operation successful
2. Remote Control:
2.1 Red indictor lighted means in programming stated, music means operation successful, default password: 123456，password length: 6numbers
2.2 Change password: Press *password*1*new password*new password#
2.3 Register fingerprint：Press*password*2*DD# , DD from 00 to 02(00, 01 and 02 refer tothree different fingerprint databases), each database can store fingerprint 100 pieces； Exit fingerprint in register state when press * button or waiting for 10s.
2.3. Empty fingerprint：Press *password*3*password#
2.4. Delay time for closing relay：Press *password*5*SS #; SS from 00 to 20, SS means the closing time for relay(from 0.5s to 20s), e.g.: 00 means 0.5s, 20 means 20s; Default time is 5s.
2.5. Delete fingerprint：Press *password*6*DD#, DD from 00 to 02 (00, 01 and 02 refer tothree different fingerprint databases).
2.6. PasswordUsing：Press *password and relay closed, press # and relay opened.
When chose 2, closing time of the relay is 5s after pass fingerprint(5s is default time, and it can be adjusted by remote control);
When chose 1, relay closed when fingerprint passed, relay will be opened when removing finger.
·Interface: USB2.0/UART(TTL logical level)
·Resolution: 500 DPI
·Work Current: Typical ≤75 mA
·Voltage: DC 4.2-6.0V (or 3.3V)
·Fingerprint capacity: 1000
·Dimension: 52 *20*22 (mm)
·Image Capture Surface: 15*11 (mm)
·Sensor Life: 100 million times
·Static Indications: 15KV
·Character file Size: 256 bytes
·Template Size: 512 bytes
·Security Level: 5 (1,2,3,4,5(highest))
·Scanning Speed: < 0.3 second
·Verification Speed: < 0.2 second
·Matching Method: 1:N
·FRR (False Rejection Ratio): ≤0.1%
·FAR (False Acceptance Ratio): ≤0.0001%
·Operating Environment Temperature: -20°C ---50°C
·RS232 communications baud rate: 9600BPS~115200BPS changeable
Corresponding parameter set not found, please add it in property template of background
GROW K216+R303T Fingerprint Access Control
No content information display available
Please add data record on website background.