Hangzhou Grow Technology Co., Ltd

Address: Room 310, Building B, Building 1, No. 279, Shiqiao Road, Xiacheng District, Hangzhou

 

Tel:86 571 86688123

Fax:86 571 89922886

NEWS CENTER

Copyright ©   Hangzhou Grow Technology Co., Ltd

PRODUCTS CENTER

>
>
>
GROW K200+R307 Fingerprint Access Control
Page view:
产品名称

GROW K200+R307 Fingerprint Access Control

GROW K200+R307 New Design Multi-function Fingerprint Access Control Control board+R307 Optical Fingerprint Sensor Module
Power Supply
4*AA battery or DC5V
Stand-by Mode Current
Less than 7 uA
Fingerprint Capacity
120
Output
DC5--6V,500mA
Quantity
-
+
没有此类产品
DETAIL
Product parameters
K200 Technical Parameters
·Fingerprint capacity: 120
·Power supply: 4*AA battery or DC5V
·Stand-by mode current: less than 7 uA
·Output: DC5--6V,500mA
 
 
Operation Instruction
1.Press SET button shortly,system in administrator register status and blue indicator light flash fast, press two times for each fingerprint, fingerprint register successfully when hearing music.Fingerprint can be registered continuously,and it can register 20 pieces administrator fingerprint. If no need for adding fingerprint, waiting for 6seconds or press the SET button to exit.
 
2.When back to factory default, press SET button until hear “Di-Di-Di” beep and release the button,means initialization operation successful.
 
3.Register User Fingerprint: Press the administrator fingerprint until hear the music and blue indicator light flash fast, means can add user fingerprint.Press two times for each user fingerprint, fingerprint register successful when hearing music. Fingerprint can be registered continuously, it can register 100 pieces user fingerprint.
 
4.Delete User Fingerprint:Press the administrator fingerprint when hear the music and blue indicator light flash fast, move the finger until hear “DiDiDi” long deep, than all user fingerprints are deleted.
 
5.Mode selection,setby the toggle switch:
a) 1:ON, 2:ON Output DC5V and keep 0.5 second; stop 5 seconds,then minusvoltage outputted and keep 0.5 seconds.
b) 1:ON, 2:OFF Output DC5V and keep 1 second
c) 1:OFF, 2:ON Output DC5V and keep 10 seconds
d) 1:OFF, 2:OFF Keeping output DC5V until removing the finger
 
 
R307 Specifications
·Type: Optical
·Interface: USB2.0/UART(TTL logical level)
·Resolution: 500 DPI
·Work Current: Typical ≤75 mA
·Voltage: DC 4.2-6.0V (or 3.3V)
·Fingerprint capacity: 1000
·Dimension: 52 *20*22 (mm)
·Image Capture Surface: 15*11 (mm)
·Backlight: Blue
·Sensor Life: 100 million times
·Static Indications: 15KV
·Character file Size: 256 bytes
·Template Size: 512 bytes
·Security Level: 5 (1,2,3,4,5(highest))
·Scanning Speed: < 0.3 second
·Verification Speed: < 0.2 second
·Matching Method: 1:N
·FRR (False Rejection Ratio): ≤0.1%
·FAR (False Acceptance Ratio): ≤0.0001%
·Operating Environment Temperature: -20°C ---50°C
·RS232 communications baud rate: 9600BPS~115200BPS changeable        
Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article

Related Products

No content information display available
Please add data record on website background.