Hangzhou Grow Technology Co., Ltd

Address: Room 310, Building B, Building 1, No. 279, Shiqiao Road, Xiacheng District, Hangzhou

 

Tel:86 571 86688123

Fax:86 571 89922886

NEWS CENTER

Copyright ©   Hangzhou Grow Technology Co., Ltd

PRODUCTS CENTER

Page view:
产品名称

GROW K212 Fingerprint Control Board

GROW K212 Switch Power Supply Fingerprint Access Control Control Board Door System
Power Supply
DC8--30V
Stand-by Mode Current
40mA
Fingerprint Capacity
200
Output
±DC5V,300mA
Quantity
-
+
没有此类产品
DETAIL
Product parameters
Interface Usage
P1:Power supply,Input voltage: DC8--30V,Input current: 0.3A
P2:Relay output
P3:Active Signal of open door,Voltage DC12V(Input)
P4:Fingerprint module(Input)
P5:Micro-motor(Output)
P6:Button for opening door, closing signal(Input)
Adjustable resistance: Setting closing time for relay
 
 
Technical Parameters
·Power supply: DC8--30V,
·Stand-by mode current:40mA
·Fingerprint capacity: 200
·Interface output of motor: ±DC5V,300mA
·Interface output of relay: 3A
 
 
Operation Instruction
1. System on working state, indicator light(LED) flash slowly.
2. Press SET button, system in register state and indicator light flash fastly.
3. Fingerprint can be registered continuously when system in register state; if no need for adding fingerprint more, exit after waiting 5 seconds or by press SET button;
4. When back to factory default, press RESET button until hear“Di”, release the button, hearing “Di” long beep means operation successful;
5. Fingerprint verified or the button for opening door closed, the relay actuated, the relay time can be set by adjustable resistance,setting time: 0.5-9 seconds;Motor interface output DC5V and keep 0.5 seconds; stop 5 seconds, then minus voltage outputted and keep 0.5 seconds.
Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article

Related Products