Hangzhou Grow Technology Co., Ltd

Address: Room 310, Building B, Building 1, No. 279, Shiqiao Road, Xiacheng District, Hangzhou

 

Tel:86 571 86688123

Fax:86 571 89922886

NEWS CENTER

Copyright ©   Hangzhou Grow Technology Co., Ltd

PRODUCTS CENTER

>
>
>
GROW K216+R303T Fingerprint Access Control
Page view:
产品名称

GROW K216+R303T Fingerprint Access Control

GROW K216+R303T Fingerprint Recognition Access Control System+R303T Capacitive fingerprint sensor
Power Supply
DC10V--30V
Stand-by Mode Current
6mA(DC12V)
Fingerprint Capacity
300
Output
Relay(Max. current: 10A)
Quantity
-
+
没有此类产品
DETAIL
Product parameters
K216 Technical Parameters
·P1: Power supply:DC10V--30V
·P2: Output:Relay(Max. current: 10A)
·P3: MX 1.0-6P Fingerprint Module (can connect R502,R502-A,R503)
·P4: MX 1.25-6P Fingerprint Module (can connect R300,R301T,R302,R303,R303T,R305,R306,R307,R501)
·Standby current:6mA(DC12V)
·Fingerprint capacity:300 pieces
 
 
K216 Operation Instruction
1. SET Button:
1.1 Press SET button shortly,system in register state and indicator light flash fast, press two times for each fingerprint, fingerprint register successful when hearing music.Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting 8 seconds.(Fingerprint capacity is 100 pieces when press SET button,the registered fingerprints are stored in database 01)
1.2 When back to factory default, press SET button until hear “Di” long beep and music,means initialization operation successful
 
2. Remote Control:
2.1 Red indictor lighted means in programming stated, music means operation successful, default  password: 123456,password length: 6numbers
2.2  Change password: Press *password*1*new password*new password#
2.3  Register fingerprint:Press*password*2*DD# , DD from 00 to 02(00, 01 and 02 refer tothree different fingerprint databases), each database can store fingerprint 100 pieces; Exit fingerprint in register state when press * button or waiting for 10s.
2.4.  Empty fingerprint:Press *password*3*password#
2.5.  Control Work Mode:
        Press *password*4*00#    Fingerprint module touch standby function ON
        Press *password*4*01#    Fingerprint module touch standby function OFF(Normally on Mode)
2.6.  Delay time for closing relay:Press *password*5*SS #; SS from 00 to 20, SS means the closing time for relay(from 0.5s to 20s), e.g.: 00 means 0.5s, 20 means 20s; Default time is 5s.
2.7.  Delete fingerprint:Press *password*6*DD#, DD from 00 to 02 (00, 01 and 02 refer tothree different fingerprint databases).
2.8.  PasswordUsing:Press *password and relay closed, press # and relay opened.
 
3 FunctionSet:
When chose 2, closing time of the relay is 5s after pass fingerprint(5s is default time, and it can be adjusted by remote control);
When chose 1, relay closed when fingerprint passed, relay will be opened when removing finger.
 
 
R303T Specifications
·Interface:USB 2.0 and UART(3.3V-TTL logic)
·Resolution:508 DPI
·Work Current: <55mA
·Voltage: DC 4.2-6.0V
·Fingerprint capacity:1000
·Security Level: 1-5, default is 3
·Sensor Array: 208*288 pixel
·Fingerprint reader module size: 20.4 * 33.4 (mm)
·Effective collection area: 11 * 15 (mm)
·ScanningSpeed: < 0.2 second
·Verification Speed: < 0.3 second
·Matching Method: 1:1; 1:N
·FRR (False Rejection Ratio): ≤0.01%
·FAR (False Acceptance Ratio): ≤0.00001%
·Work environment: -20°C ---55°C
·Work Humidity: 20-80%
·Communications baud rate (UART): (9600 × N) bps where N = 1 ~ 12(default N = 6, ie 57600bps)  
Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article

Related Products

No content information display available
Please add data record on website background.