Hangzhou Grow Technology Co., Ltd

Address: Room 310, Building B, Building 1, No. 279, Shiqiao Road, Xiacheng District, Hangzhou

 

Tel:86 571 86688123

Fax:86 571 89922886

NEWS CENTER

Copyright ©   Hangzhou Grow Technology Co., Ltd

PRODUCTS CENTER

>
>
>
GROW K200-3.3+R502 Fingerprint Control Board
Page view:
产品名称

GROW K200-3.3+R502 Fingerprint Control Board

Power Supply
4*AA battery or DC5V
Stand-by Mode Current
Less than 5 uA
Fingerprint Capacity
120
Output
DC5--6V,500mA
Quantity
-
+
没有此类产品
DETAIL
Product parameters
K200-3.3 Technical Parameters
·Fingerprint capacity: 120
·Power supply: 4*AA battery or DC5V
·Stand-by mode current: less than 5 uA
·Output: DC5--6V,500mA
 
 
K200-3.3 Operation Instruction
1.Press SET button shortly,system in administrator register status and blue indicator light flash fast, press two times for each fingerprint, fingerprint register successfully when hearing music.Fingerprint can be registered continuously,and it can register 20 pieces administrator fingerprint. If no need for adding fingerprint, waiting for 6seconds or press the SET button to exit.
2.When back to factory default, press SET button until hear “Di-Di-Di” beep and release the button,means initialization operation successful.
3.Register User Fingerprint: Press the administrator fingerprint until hear the music and blue indicator light flash fast, means can add user fingerprint.Press two times for each user fingerprint, fingerprint register successful when hearing music. Fingerprint can be registered continuously, it can register 100 pieces user fingerprint.
4.Delete User Fingerprint:Press the administrator fingerprint when hear the music and blue indicator light flash fast, move the finger until hear “DiDiDi” long deep, than all user fingerprints are deleted.
 
5.Mode selection,setby the toggle switch:
a) 1:ON, 2:ON Output DC5V and keep 0.5 second; stop 5 seconds,then minusvoltage outputted and keep 0.5 seconds.
b) 1:ON, 2:OFF Output DC5V and keep 5 second
c) 1:OFF, 2:ON Output DC5V and keep 1 seconds
d) 1:OFF, 2:OFF Keeping output DC5V until removing the finger
 
6.OPEN(P3):
a) 1:ON, 2:ON Output DC5V and keep 0.5 second; stop 5 seconds,then minusvoltage outputted and keep 0.5 seconds.
b) 1:ON, 2:OFF Output DC5V and keep 5 second
c) 1:OFF, 2:ON Output DC5V and keep 1 seconds
d) 1:OFF, 2:OFF No Output
 
 
R502 Specifications
·Interface:RS232 (TTL)
·Resolution:508 DPI
·Voltage:DC 3.3V
·Working current(Fingerprint acquisition):18mA      
·Standby current(finger detection): Typical touch standby voltage: 3.3V, Average current: 2uA
·Fingerprint capacity:200
·Sensing Array:192*192 pixel
·Fingerprint reader module size: diameter 22mm
·Effective collection area: diameter 15mm
·Connector: MX1.0-6pin
·LED Color: Bule and Red
·ScanningSpeed:< 0.2 second
·Verification Speed:< 0.3 second
·Matching Method:1:1; 1:N
·FRR (False Rejection Ratio):≤0.01%
·FAR (False Acceptance Ratio):≤0.00001%
·Antistatic capacity:15KV
·Abrasive resistance intensity:1 million times
·Peak power consumption:60 mA
·Work environment:-20°C ---55°C
·Work Humidity:0-90%
·Communications baud rate (UART):(9600 × N) bps where N = 1 ~ 12(default N = 6, ie 57600bps)
 
Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article

Related Products

No content information display available
Please add data record on website background.